Low wet granulator
The machine is a process machine widely applied for solid preparation production in the pharmaceutical industry. It has such functions as mixing, granulating, etc. It is widely used in such industries as medicine, chemical industry, food, etc.
The materials are charged into the mixing vessel by the charging machine or vacuum charging system, and flow under a multi dimensional shearing status after mixing so that sufficient mixing is realized. The adhesive sprayed by the spray gun or injected manually will make the materials into even granules under the action of the mixing paddle and cutter. The granules will be discharged from the discharging port and transferred to the next procedure.
This machine adopts horizontal cylinder structure or conical structure with reasonable structure
Inflatable sealed drive shaft can be switched to water during cleaning
Fluidized granulation, granules are approximately spherical and have good fluidity
25% less adhesive than traditional processes, shortening drying time
Each batch is dry mixed for 2 minutes, granulated for 1-4 minutes, and the work efficiency is 4-5 times higher than the traditional process
Complete in the same closed container, dry mixing-Wet mixing granulation, the process is reduced, in line with gMP regulations
The entire operation has strict safety protection measures
When the difference between the main drug and the auxiliary material is large, the uniform combination can still be achieved without stratification
主要技術參數 MAIN TECHNICAL PARAMETERS
Our company can customize the products according to special requirements of users. you will not be notified of any changes in advance.